(Enter a Model Number or Keyword)
 
 

 

The Edge-O-Dock leveler permanently attaches to face of dock.  It is recommended for docks to be at least forty-eight (48) inches high.  When the trailer departs, the lip drops automatically behind the face of the bumpers.  Concrete recess is not required.  It comes complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping is twenty-seven (27) inches, with a thirty-six (36) inch long ramping length available for smaller grade.  Each unit provides a service range of five (5) inch above dock and  five (5) inch below dock height. A steel dock edge, or approach ramp is required for proper installation.

WB01372_.gif (406 bytes) Mechanical Edge-O-Dock (series FM)


model FM-2072

The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

 

Mechanical Edge-O-Docks
Model PDF's Type Usable
Width
Capacity
(lbs)
Wt.
(lbs)
FM-0648 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 48" Width 6,000 348
FM-2066 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 66" Width 20,000 514
FM-2072 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 72" Width 20,000 523
FM-2078 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 78" Width 20,000 583
FM-2566 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 66" Width 25,000 545
FM-2572 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 72" Width 25,000 577
FM-3066 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 66" Width 30,000 633
FM-3072 Warranty PDFPhoto GalleryCompliance Certificate Mechanical 72" Width 30,000 709

= Approval Drawing Warranty PDF = Warranty Photo Gallery = Photo Gallery Compliance Certificate = Testing Certificate

WB01372_.gif (406 bytes) Hand Pump Hydraulic (series PP)


PP-2066

The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. Truck must pull out for leveler to return to stored position.

Hand Pump Hydraulic Edge-O-Docks
Model PDF's Type Usable
Width
Capacity
(lbs)
Wt.
(lbs)
PP-1572-36* Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 72" Width 15,000 752
PP-2066 Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 66" Width 20,000 583
PP-2072 Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 72" Width 20,000 627
PP-2566 Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 66" Width 25,000 569
PP-2572 Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 72" Width 25,000 601
PP-2572-36* Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 72" Width 25,000 749
PP-3066 Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 66" Width 30,000 998
PP-3072 Warranty PDFPhoto GalleryCompliance Certificate Hand Pump 72" Width 30,000 1061

* Note: 36 denotes ramp length

= Approval Drawing Warranty PDF = Warranty Photo Gallery = Photo Gallery Compliance Certificate = Testing Certificate

WB01372_.gif (406 bytes) Electric Hydraulic (series PE)

 

The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. 115V, 1 phase power standard. Unit comes complete with motor, pump, control box, cylinder, lines and oil.  Truck must pull out for leveler to return to stored position.

Electric Hydraulic Edge-O-Docks
Model PDFs Description Usable
Width
Capacity
(lbs)
Wt.
(lbs)
PE-1572-36* Warranty PDFPhoto GalleryCompliance Certificate Electric 72" Width 15,000 805
PE-2066 Warranty PDFPhoto GalleryCompliance Certificate Electric 66" Width 20,000 644
PE-2072 Warranty PDFPhoto GalleryCompliance Certificate Electric 72" Width 20,000 601
PE-2566 Warranty PDFPhoto GalleryCompliance Certificate Electric 66" Width 25,000 619
PE-2572 Warranty PDFPhoto GalleryCompliance Certificate Electric 72" Width 25,000 649
PE-2572-36* Warranty PDFPhoto GalleryCompliance Certificate Electric 72" Width 25,000 826
PE-3066 Warranty PDFPhoto GalleryCompliance Certificate Electric 66" Width 30,000 1055
PE-3072 Warranty PDFPhoto GalleryCompliance Certificate Electric 72" Width 30,000 1118

*NOTE: 36 denotes ramp length.

= Approval Drawing Warranty PDF = Warranty Photo Gallery = Photo Gallery Compliance Certificate = Testing Certificate


Edge-O-Dockleveler Options
Model PDF's Description Wt. (lbs)
FM-HOOK Photo Gallery Lifting Hook for mechanical unit (old style) 3
FM-BAR Photo Gallery Actuation Handle for Mechanical Unit (New Style) 8
BB Photo Gallery Steel Bumper Box 75
RB   Rubber Bumper (Replacement) 18"W x 8"H x  2"P 16
FM-FM   FM-Series (Hook Style) To FM-Series (handle Style) Conversion Kit 12
FM-PP   FM-series to PP-series conversion kit 53
FM-PE Photo Gallery FM-series to PE-series conversion kit 89
PP-PE   PP-series to PE-series conversion kit 56
CE   Curb edge - 6" channel x 96" long 90
CED   Canted Edge --
RAMP-2 Approach ramp 96"Wx12"Lx2"H 120
RAMP-4 Approach ramp 96"Wx24"Lx4"H 215
AP   Approach Plate 1/4" thick x 12" long x 96" wide 132
AP-BE   Approach Plate 1/4" thick x 12" long x 96" wide with beveled edge 130
= Approval Drawing Warranty PDF = Warranty Photo Gallery = Photo Gallery Compliance Certificate = Testing Certificate

Freight Quote

 

Copyright 2017
Vestil Manufacturing. 
All rights reserved.  Disclaimer Information.

Terms & Conditions of Sale
 


FM, PP, & PE Owners Manual


FM Survey Sheet

Click Here to check out our full size Docklevelers

 
 

           

  |  Ergonomic  |  Loading Dock  |  Material Handling  |  Drum Handling  |  Packaging  |  Storage Solutions  | Facilities Maintenance | Ladders

Phone (260) 665-7586 Fax (260) 665-1339 E-mail: sales@vestil.com